Transport And Operating Positions; Work Position - Nogueira SDN-170A Manual De Instrucciones

Transport and operating position
TRANSPORT POSITION
From the tractor seat, pull rope A to release the cutting bar latch.
Activate the remote controller valve of the tractor, and then the piston will lift the cutting bar, placing it in
the transport position (vertical).
Then, assemble the SAFETY LATCH on piston B and place the cotter pin C (fig.11). The SAFETY
LATCH prevents the bar from lowering in cases of eventual failure in the hydraulic system. It is
extremely important in order to avoid accidents.

WORK POSITION

Remove cotter pin C and release the SAFETY LATCH from piston B (fig.11). Activate the remote
controller valve on the tractor and lower the bar until it is in the working position (horizontal).
fig.09
fig.10
fig.11
14
Instructions Manual