CleanForce CF1800HD Manual De Referencia página 12

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

aSSEMBLY aND OpEraTION INSTrUCTIONS
CaUTiOn
Make sure spray tip and wand is well locked. Do not move the spray tip while
trigger is depressed.
CaUTiOn
If painted surfaces are peeling or chipping, use extreme caution as pressure
washer may remove the loose paint from the surface.
For most cleaning applications, a twenty degree (20
recommended to avoid damage to the surface being sprayed.
The pressure of spray on the surface will increase when you move the wand closer
to the surface.
OFF
Turn off the pressure washer by
pressing the switch button with mark
" O ", activate the safety latch for a
break. For storage, drain machine
after use by removing water con-
nection, turning ON the machine for
a few seconds and depressing gun
trigger to release remaining water in
the pump. Turn OFF immediately.
) spray angle be
o
11

Capítulos

Tabla de contenido

Solución de problemas

loading

Productos relacionados para CleanForce CF1800HD

Tabla de contenido