Operation Instruction - CleanForce CF1800HD Manual De Referencia

aSSEMBLY aND OpEraTION INSTrUCTIONS
Attach the garden hose to the water
inlet (hand tighten only).
1
Attach garden hose to water supply and
turn water valve on to the fall on position.
The water temperature must not exceed
40 C(104 F) and the supply pressure
o o
must be between 40 to 80 PSI.
CaUTiOn
The pressure washer must only be used with clean water. Use of unfiltered water
or corrosive chemicals will damage the pressure washer.
This pressure washer is not intended to pump hot water. Never connect it to a hot
water supply as it will significantly reduce the life of the pump.
OPERATION INSTRUCTIONS
Warning
Risk of injury, Do Not Direct discharge stream at self or other
persons.
Warning
Before cleaning any surface, an inconspicuous area should be
cleaned to test spray pattern and distance for maximum cleaning
results.
2
9