Original Accessories/Auxiliary Equipment; Setting Up; Additional Handle; Depth Stop - Parkside PSBM 1100 B1 Traducción Del Manual De Instrucciones Original

Original accessories/auxiliary
equipment
■ Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.

Setting up

WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance.

Additional handle

NOTE
► For safety reasons, you should only use this
appliance with the additional handle
attached.
♦ Loosen the strap on the additional handle
by turning it clockwise.
♦ Push the additional handle
release chuck .
♦ Turn the additional handle
position.
♦ The locking positions on the additional handle
must now be pushed over the locking pins on
the spindle of the appliance.
♦ Turn the additional handle
again to tighten it.
NOTE
► Move the additional handle
various locking positions depending on your
working position. Undo and lock the addi-
tional handle as described previously.
│ GB │ MT
■ 42

Depth stop

♦
♦
♦
♦
♦

Changing tools

The appliance has a fully automatic spindle lock.
♦
♦
over the quick-
♦
to the required
♦

Attaching the dust extractor

anticlockwise
shavings can ignite parts of the extractor.
into the
♦
♦
Push the toggle button for the depth stop
and keep it pushed in.
Insert the depth stop
handle .
Make sure that the teeth on the depth stop
point upwards and downwards.
Pull the depth stop
between the tip of the drill and the tip of the
depth stop corresponds with the required drilling
depth.
Release the toggle button for the depth stop
to lock the depth stop
When the motor is stopped, the power train
locks so that the quick-release chuck
opened by turning it towards
Insert the desired tool into the quick-release
chuck .
Turn the quick-release chuck
LOCK to tighten the tool.
The spindle lock is automatically released when
the motor starts (ON/OFF switch
CAUTION! RISK OF FIRE! Do not
work on metallic materials while the
dust extractor is attached. Hot metal
NOTE
► Do not use the dust extractor
wood or plastic shavings. They can jam the
dust extractor .
Use the wing screw
extractor to the additional handle
Fig. A).
It is best to use a workshop extractor.
Connect the extractor hose to the dust extrac-
tion adapter .
into the additional
out until the distance
.
can be
UNLOCK .
towards
pressed).
to extract
to attach the dust
(cf.
PSBM 1100 B1