Ambient Temperature; Start Up Of The Chiller - Pfannenberg CCE Standart Serie Instrucciones De Operación Y Instalación

Ambient temperature

Chiller is designed to operate in the ambient temperature range indicated in the type label. When ambient temperatures areout
of that range, manufacturer must be consulted. High ambient temperatures reduce Chiller capacity. Low ambient temperatures
require special controls. Fluid heaters may be required to prevent freezing and to hold the fluid in the Chiller reservoir at a
constant temperature in order to reduce start-up delays while the fluid warms up to operating temperature.

7. Start up of the chiller

CAUTION:
QUALIFIED PERSONNEL.!!!!!!!
NOTE: The following instruction will guide you through the start up procedure in detailed steps. For a
quick commissioning instruction please see appendix A1.
•
Turn main switch, control switch, all circuit breakers to switches to the - 0 - (off) position.
•
Connect water inlet and outlet pipes.
•
CHILLER with tank: Remove filling plug, which is located in the top side of the chiller (external)
70040-120_01-_-(CCE_Op._Manual_EN-DE-IT-ES-FR-RU).docx
WORK ON THE ELECTRICAL AND REFRIGERANT CIRCUITS MAY ONLY BE PERFORMED BY
Picture 7 - Main switch
Picture 9 – Example of filling point
English
Picture 8 - Circuit Breakers
12