Washing Programs - Fulgor Milano FDW8291 Manual De Instrucciones

1.2
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
QUICK PROGRAMS OPTION
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle by from a minimum of 10% to a
maximum of 55%, depending on the cycle selected. To activate this
option, press the QUICK PROGRAMS OPTION button
comes on) after selecting the program required. The option is
automatically deactivated at the end of the program.
HYGIENE OPTION
This function performs an extra antibacterial rinse at the end of the
washing cycle, assuring a further reduction in the number of bacteria
present. In order to ensure that the antibacterial rinse is effective, the
temperature must not fall while it is in progress; if this should occur (e.g.
due to a power blackout or because the door is opened), the indicator
light flashes until the dishwasher is switched off or a new program is
selected, to warn that the antibacterial rinse has not been fully effective.
Press the button
to indicate that the function is active.
SPREAD HALF LOAD
When there are not many dishes to be watched, the "spread half load"
option, controlled by button
and reduces the program's duration. Place dishes in both baskets then
load the detergent dispenser than less than the normal amount for a full
load..
8
User instructions

Washing programs

to enable/disable the option; the light illuminates
is useful; it saves water and electricity
(light