Control Panel Guide - SERVPRO Revolution LGR Manual Del Propietário

CONTROL PANEL GUIDE

Button Functions
ON/OFF. After plugging in the unit, the display will show
the word "OFF". Press
When the machine is turned on, the display normally reads
NOTE: If the unit was previously unplugged or otherwise
lost power prior to turning the unit off, the display will show
OFF / POWER FAILURE. Press
clear this message.
Note that the second line of the display cycles between
inlet temperatures and %RH values.
In some conditions the unit will perform a numeral count-
down when you first plug it it. The countdown will range up
to maximum of 60 seconds, and will count down to zero
before starting the compressor. Do not press any buttons
until the unit has completed the delay countdown and dis-
plays the "Unit On" message shown above. NOTE: If no
compressor delay countdown is displayed, a delay is not
necessary and the machine will begin operation immediate-
ly.
DISPLAY MENU. Press repeatedly to cycle through the
display of additional dehumidifier conditions and user de-
fined settings. This includes JOB HOURS>, INLET OUT-
LET, HUMIDISTAT MODE>, HUMIDISTAT SETPOINT>,
TEMP UNITS>, LANGUAGE>, COIL TEMP, SENSOR ID>
(this function is not used in the Revolution), and
COMPRSSR CURRENT.
Menu items marked by a caret (>) may be set by the users
using the MENU SELECTION key. See below.
To return to the main menu, press the
once.
MENU SELECTION. Press to change the values of any
of the User Defined Menu items displayed with a caret (>).
To return to the main menu, press the
once.
See User Settings Menu (below) for details.
07-01897D #613 (F413-SP) Warranty 07-00420
ON/OFF to turn the unit on.
MENU SELECTION to
ON/OFF key
ON/OFF key
5 Dri-Eaz Products, Inc.