TROUBLESHOOTING
F A U L T
Water drips out
Unit was unplugged before
when moving unit
purging was complete.
Unit does not
Unit not switched on.
operate
No power to machine.
Not enough time to dry.
Unit operating,
Poor air movement in room.
but room not dry
Excessive moist air infiltration.
Room air is dry.
Unit collects too
Room temperature is too low.
little water
Filter is clogged.
Coils are clogged.
If the problem you are experiencing is not listed here, call your local distributor or contact
our Service Department toll-free at 800-932-3030 for further assistance.
SPECIFICATIONS
Name
Dimensions (W × H × D)
Weight (w/ cord & hose)
Amps
Power
Air movement
Water removal
Operating temperature range
Safety
Specifications are subject to change without notice. Some values
may be approximate.
07-01897D #613 (F413-SP) Warranty 07-00420
C A U S E
Revolution LGR Dehumidifier
Model F413-115V
12.5 × 17.6 × 21.5 in.
31.8 × 44.7 × 130.8 cm
65 lbs. | 29.5 kg
6.2 amps at 80°F/60% RH
115V / 60Hz
121–180 CFM | 3.43–5.1 CMM
80 pts/day | 38 L/day
at 80°F/60% RH (AHAM)
134 pts/day | 63 L/day
at 90°F/90% RH
33–100°F |1–38°C
ETL certified to CSA Standards
S O L U T I O N
Purge unit before moving. See PURGE in Control Panel in-
structions, p. 6. At the end of the job, see "At the End of the
Job," p. 3.
Switch unit on.
Plug in unit; check power cord connection at wall outlet and at
base of unit.
Allow more time for drying.
Increase air movement with air movers.
Seal off area to reduce infiltration.
Confirm humidity level with hygrometer.
Increase room temperature.
Check filter. Clean or replace as necessary.
Check coils. Clean as necessary.
PARTS INCLUDED
40 ft. (12 m) of drain hose with quick-connect fitting.
25 ft. (7.6 m) detachable power cord.
3M™ HAF High Air Flow filter
OPTIONAL
Duct Attachment Kit (F530)
FILTERS FOR REORDER
3M™ HAF High Air Flow filter F372 (24 pack)
ADDITIONAL PRODUCT INFORMATION and current
documentation is available at http://Revo.DriEaz.com.
FOR PARTS AND SERVICE CONTACT SERVPRO
RMA DEPARTMENT.
12
Dri-Eaz Products, Inc.