Before Each Use - SERVPRO Revolution LGR Manual Del Propietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Dehumidifier Maintenance Checklist
Use this checklist to monitor the maintenance of your Dri-Eaz dehumidifiers. As each task is completed, note the date
and the operator's initials in the boxes provided. Regular maintenance will keep your equipment operating at maximum
efficiency.

BEFORE EACH USE

Inspect the electrical cord for damage.
Look for fraying, cuts, etc. Replace dam-
aged cords before using the unit.
Inspect filter. Look for accumulated dust
and dirt that would restrict airflow. Vacuum
out any debris.
Check drain hose for obstructions. Clear
any debris present.
IMPORTANT: HAF filters may be vacuumed and reused up to three times before replacement. Filters should be replaced after every mold job.
MONTHLY
Inspect coils and heat exchange block.
Clean when visibly dirty.
Check pump basin and drip tray. Clean
when dirt and debris are present.
Inspect and clean pump check valve.
Clean exterior housing to maintain profes-
sional appearance.
Inspect impeller, duct ring and grill for
damage and/or debris and clean/replace if
required.
Inspect control panel. Toggle through dis-
play screens to ensure that the unit is func-
tioning properly.
NOTES:
Note any other maintenance tasks completed, and record any damage or operational problems that may need attention.
Date
Note
07-01897D #613 (F413-SP) Warranty 07-00420
13
Dri-Eaz Products, Inc.
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

613

Tabla de contenido