Recommended Usage; Warning - Buffalo HD-LBU3 Manual De Usuario

2

Recommended Usage

To avoid damage to your data, please follow these precautions:
Never configure this unit as a destination for virtual memory.
Never perform any of the following operations while the access LED is blinking:
• Unplug the cables
• Turn off your computer
• Put your computer into standby, hibernate, or sleep mode
• Mac OS X may not recognize this device at boot. If this happens, unplug the USB cable, then plug it
again after a few seconds.
• This unit supports hot-plugging connections. You can plug or unplug the data cable while the
DriveStation and your PC are on. However, never unplug the cable while the power/access LED is
flashing, or your data may be lost or damaged.
• Do not lean any object against this unit. It may cause the unit to malfunction.
• If you use this unit with Windows 7, Vista, or XP on a computer with a USB 2.0 or 1.1 port, you may
receive a message indicating that a high-speed USB hub is connected to a non high-speed USB device.
To continue, click [X].
• You may hear some noise while this unit is working, especially while it's booting or being accessed.
This is normal.
• Always refer to the manuals for your computer and peripheral devices.
• After a system crash, Mac OS may ask you to insert your OS X system disk to recover the OS.
Disconnect the DriveStation from your Mac before initiating the recovery process.
• If you are going to recover from Macintosh, disconnect this unit, it may not be recovered without
removing this unit.
• Booting an OS from this drive is not supported.

Warning

HD-LBU3 User Manual
3