Learning Mode - Velleman VELBUS VMB1DM Manual Del Usuario

Learning mode:

Only push buttons connected to the Velbus via a push button interface or a control panel are appropriate for the procedure below. Each
command can accept up to 14 different push buttons. Memorize he unique address of the module
Address Command
F1 OFF: Learning push buttons switching off the lamp
E1 ON: Learning push buttons turning on the lamp to full intensity
D1 TGL: Learning push buttons turning on the lamp to full intensity or turning the lamp off
C1 DIM: Learning push buttons/sliders activating the set mode on the module
B1 UP: Learning push buttons increasing the lamp's intensity
A1 DWN: Learning push buttons decreasing the lamp's intensity
91 ATM: Learning push buttons turning on the lamp to a specific light intensity (atmosphere)
81 ADM: Lamp's light intensity for corresponding atmosphere push buttons
The lamp will be switched off and the operation mode LED will blink very rapidly to indicate the learning mode. The LEDs of the
learned push buttons will also blink very rapidly. In this way it is possible to see which push buttons for the corresponding group have
already been learned.
You can add a specific push button by maintaining it pressed until the lamp lights up. When releasing the push button the lamp will
switch off and the push button indication LED will blink very rapidly as a confirmation. If this does not work then the maximum amount
of push buttons has been reached.
To delete a learned push button, maintain it pressed. When releasing the push button the indication LED will be turned off.
You can delete all learned push buttons for a specific control group by maintaining the manual control on the dimmer module pressed
until the lamp lights up. When releasing the manual control push button the lamp and the indication LEDs of all corresponding push
buttons will turn off.
To learn a light atmosphere set the dimmer module on address '81'.
The LEDs of the push buttons creating atmospheric light will blink rapidly. To assign a specific light intensity to an atmosphere push
button, operate the corresponding push button until the desired light intensity has been reached.
10