Safety
IMPORTANT: Never leave cleaning
residue on the cooktop; the glass may
become stained.
IMPORTANT: The appliance is for
domestic use as a cooking device; do not
use as a source of heat.
Installation
All installation must be carried out by a competent
person or qualified electrician. Before connecting
the mains supply ensure that the mains voltage
corresponds to the voltage on the rating plate.
Direct connection
• The appliance must be connected directly to
the mains using an omnipolar circuit breaker
with a minimum opening of 3 mm between the
contacts.
• The installer must ensure that the correct
electrical connection has been made and that it
complies with the wiring diagram.
• The cable must not be bent or compressed.
• Regularly check the power cord for damage.
WARNING: This is a Class I appliance and
MUST be earthed.
• The appliance is supplied with a 3 core mains
cable coloured as follows:
Brown = L2
Black = L1
Blue = N or Neutral
Green and Yellow = E or Earth
WARNING: Securely crimp the two
Live cables together (L1 and L2) before
connecting them to the Live terminal of
the mains supply.
WARNING: Before obtaining access to
the terminals, all supply circuits must be
disconnected.
208848_s1_s4-5059340127521-C&L-A4-IM-INT-Safety-V01.indd 4
208848_s1_s4-5059340127521-C&L-A4-IM-INT-Safety-V01.indd 4
This appliance should be connected directly to
the consumer unit with a 16 Amp Residual Current
Device (RCD) protecting its circuit.
To avoid the risks that are always present when
you use an electrical appliance it is important that
this appliance is installed correctly and that you
read the safety instructions carefully to avoid
misuse and hazards. Please keep this instruction
booklet for future reference and pass it on to any
future owners. After unpacking the appliance
please check that it is not damaged. If in doubt,
do not use the appliance but contact Customer
Services.
The manufacturer declines all liability for damage
caused to persons and objects due to incorrect
or improper installation of the appliance. Any
permanent electrical installation must comply
with the latest wiring regulations applicable to
your country and for your own safety a qualified
electrician or contractor should undertake the
electrical installation.
4
32 A~
22/9/2020 7:08 PM
22/9/2020 7:08 PM