Tips For Energy Saving - EAS ELECTRIC EMF161 Manual De Instrucciones

6. TIPS FOR ENERGY SAVING

Try not to open the door too often, especially when the weather is wet and
hot. Once you open the door, close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
In normal temperature conditions, please arrange the thermostat at the middle
setting.
Before loading the appliance with packages of fresh food, make sure they
are cooled to ambient temperature.
Ice and frost layer increase energy consumption, so clean the appliance as
soon as the layer is 3-5 mm thick.
If it is the outer condenser, the rear wall should be always clean free of dust or
any impurities.
The appliance should be located in the coolest area of the room, away
◆
from heat producing appliances or heating ducts, and out of the direct
sunlight.
Let hot foods cool to room temperature before placing in the appliance.
◆
Overloading the appliance forces the compressor to run longer.
that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them
◆
in the appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or
◆
paper toweling. Liners interfere with cold air circulation, making the
appliance less efficient.
Organize and label food to reduce door openings and extended searches.
◆
Remove as many items as needed at one time, and close the door as soon
as possible.
V.1
Foods
28