Klarstein KLIMAMOBIL Manual Del Usuario página 55

To clean the air filters
Wash the dust from the air filters with clean water or vacuum the filters with an
electric vacuum cleaner.
To remove the clips
1. Use the similar tool as shown in the picture on the right. Align the tip with the
opening hole and insert the tip into the clamp. The inserted depth is approx. 3
mm. When you hear a noise, grasp the clamp with your hand and remove it.
Note: If you insert the tool too deep, the clamp may jam and be damaged
under pressure. Use a tool with a tip smaller than the hole in the clamp so that
you can fit it accurately and remove the clamp easily.
2. Sketch of a tool for removing the clamp:
EN
55