SEVERIN KS 9878 Instrucciones De Uso página 13

there is a risk of suffocation.
∙ To avoid the risk of fire, do not place
any thermo-electric appliances on
top of the unit. Do not place liquid
containers on top of the unit, to
prevent any leaking or escaping liquid
damaging the electrical insulation.
∙ Protect the inside of the cabinet at all
times from open flames and any other
sources of ignition.
∙ Remove the plug from the wall
socket
- in case of any malfunction,
- before de-frosting,
- during cleaning,
- during maintenance/work on the
appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ During all cleaning and maintenance
work, the power plug must be pulled
out in such a way that the operator
can check from any place that the plug
is still removed.
∙ Warning! Do not remove the cover of
the LED interior lighting. Call customer
service in the event of a defect in the
LED light.
∙ If the unit is not used for an extended
period of time, we recommend
keeping the door open.
∙ We reserve the right to introduce
technical modifications.
Familiarisation
1. On/Off switch for interior light
2. Temperature control
3. Temperature indicator
4. Mains indicator light
5. LED interior lighting
6. Fan
7. Storage racks
8. Drain channel cleaning tool
Before using for the first time
∙ Remove any exterior and interior packaging materials.
∙ Please ensure proper disposal of all packaging
materials.
∙ Fit the two spacer elements (1), provided, into the
corresponding guide slots (2) on the rear.
∙ Remove the red transport securing device (A); this is for
transport purposes only and can be disposed of.
∙ Clean the appliance as described under Cleaning and
defrosting.
∙ For positioning, we recommend that you tilt the unit
slightly backwards. In this way, the transport rollers can
be used to move it to its intended place of installation.
∙ The unit should only be transported in its vertical
position; do not tilt any more than 30°.
∙ Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
13