Pleasant Hearth PHIMD-2H Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2-3).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1. Insert 3 dowels (CC) into predrilled holes in
the left front panel (B). Slip the left side panel
(C) over the dowels (CC) until snug. Insert
3 bolts (AA) through washers (BB), through
glue blocks on the left side panel (C), and
into predrilled holes in the left front panel (B).
Tighten securely. Repeat using the right front
panel (D) and the right side panel (E).
2. Lay the base (G) on a smooth, flat surface.
Insert 3 dowels (CC) into predrilled holes on
each end of the base (G) as shown. Slip left
side panel assembly over dowels (CC) until
snug. Insert 3 bolts (AA) through washers
(BB), through glue blocks on the left side panel
assembly, and into predrilled holes in the left
end of the base (G). Tighten securely. Repeat
on right end of the base (G) using the right side
assembly.
3. Insert 2 dowels (CC) into predrilled holes
in top edge of the short boards on the left and
right panel assemblies. Slip the front panel (F)
over dowels (CC) until snug.
1
AA
B
C
2
D
E
G
3
F
4
BB
E
B
BB
C
CC
D
AA
CC
CC