Electrical Wiring Connection - Daikin FWC07AATNMV1 Manual De Instalación

This is proposed wiring connection. It may change subject to the chiller unit and must comply with the local and national code and regulations.
Model: FWC07AATNMV1 / FWC08AATNMV1 / FWC10AATNMV1 / FWC11AATNMV1 / FWC12AATNMV1
FCU 1
VALVE L
3WV
x1
Chiller
Model: FWC07AATNMV1 / FWC08AATNMV1 / FWC10AATNMV1 / FWC11AATNMV1 / FWC12AATNMV1
CAUTION !
FIELD SUPPLY WIRING
WITH JUMPER FOR HEAT PUMP
WITHOUT JUMPER FOR COOLING
WITH JUMPER FOR VALVE APPLICATION
WITHOUT JUMPER FOR VALVELESS APPLICATION
Note : Unit comes in standard heatpump and for valve application.
IMPORTANT: * These values are for information only. They should be checked and selected to comply with local and/or
national codes and regulations. They are also subject to the type of installation and size of conductors.
** The appropriate voltage range should be checked with label data on the unit. A main switch or other means
for disconnection, having a contact separation in all poles, must be incorporated in the fixed wiring in
accordance with relevant local and national legislation.
Model
Voltage range**
Recommended fuse*
Power supply cable size* mm
Number of conductors
• All wires must be firmly connected.
• All wires must not touch the water piping, or any moving parts of the fan motor.
• The power supply cord must be equivalent to H05VV-F (60227 IEC 52 or 60227 IEC 53) which is the minimum
requirement, and to be used in protective tube.

ELECTRICAL WIRING CONNECTION

N VALVE
3WV
A.C L.C
M.C
FAN MOTOR
FWC07AATNMV1 FWC08AATMNV1
A 2
2 1.5
3
FCU 2
L N
VALVE
3WV
x2
LEVEL SWITCH
DRAIN
AIR SWING
PUMP
MOTOR
VALVE
TO 3 WAY
VALVE
FWC10AATNMV1
220V-240V/1Ph/50Hz +
2
1.5
3
4
FCU 3
L N
220~240V/1 /50Hz
x3
3 way valve
3WV
Relay (220-240V,10A)
X1,X2,X3
LED/IR RECEIVER
(PRINTED CIRCUIT BOARD)
10
IR.RCV
WIRED
CONTROLLER
LCD WIRELESS
9
CONTROLLER
16
THERMIISTOR
COIL SENSOR
GREEN/YELLOW
L N
E
220~240V
N
1 PHASE 50Hz
L
FWC11AATNMV1 FWC12AATNMV1
!
2 2
1.5 1.5
3 3
R
S
T
N
PART NUMBER: 08024 091939
2
1.5
3