Installing The New Machine - Solera Eco Manual De Empleo Y De Mantenimiento

During maintenance and
cleaning, or in case of bad
functioning, disconnect the
machine from the power plug
(by pulling the plug and not the
cable) (pic. 2 and 3 pag.17).
Only specialized and
authorized staff can repair the
machine. Not perfect repairing
can be dangerous for the user.
Contact Solera for information
concerning the closer
authorized assistance centre.
M O D E L D-112
H E I G H T 780 mm
W I D T H 240 mm
D E P T H 560 mm
W E I G H T 32 kg
C AP A C I T Y 12 lt
P O W E R 450 w
230/50
VO L T AG E H Z 230/60
115/60
The Supplier is reserved to bring alterations without notice.
The relevant data the power are indicative. To do reference to the data of plate data restored on the
machine.
Installing the new
machine
This machine for the production
of cold drink, slush, and
sherbets the absolute
homogeneity of the product and
the possibility to regulate its
density thanks to an innovative
electronic control. Before
installing the machine, verify
that:
 Granizadora Digital is not
placed by an heat source;
 The machine has not been
damaged during
transportation. In case of
doubt, contact the supplier;
 The power supply system is
endowed with a grounding
that respects the rules of
law;
 The power supply system
capacity is adequate to the
maximum power of the
machine, as indicated on the
plate (pic. 4 pag.17).
In case of doubt, contact only
qualified staff.
D-112 D-224
D-224
USA USA
30.7 inc 780 mm 30.7 inc
9.45 inc 430 mm 16.1 inc
22 inc 560 mm 22 inc
71 lb 54 kg 119 lb
3.17 bal
3.17 gal 12 lt x 2
x 2
0.61 hp 900 w 0.61 hp
230/50 230/50 230/50
230/60 230/60 230/60
115/60 115/60 115/60
- 18 -
In order to install the machine,
carefully read the following
instructions.
This machine is only for the use
it has been manufactured for.
Any other usage is to be
considered as improper and
dangerous.
Machine description (pic. 1
 Top light
 Transparent tank
 Auger ring nut
 Hooks for the tank removal
 Control electronic board
 Supply outlet
 Main switch
 Pressure switch light
 Drip tray
 Plate data
It is suggested that the machine
is installed only by qualified
staff. A wrong installation can
cause damage to people or
things, for which things the
manufacturer declines any
D-336
D-336
USA
responsibility.
780 mm 30.7 inc
Once the machine is unpacked,
620 mm 24.4 inc
verify the integrity of the
560 mm 22 inc machine. The packaging
elements (plastic bags,
67 kg 148 lb
expanded polystyrene, nails,
3.17 gal
12 lt x 3 etc.) must not be left at children
x 3
reach as they might be
1200 w 0.61 hp
dangerous.
230/50 230/50
Remove the protection plastic
230/60 230/60
stripes also from the internal
115/60 115/60
side of the grids.
Warnings
pag.17):
Installation