Adjusting The Value Downwards; Display The Scale Adjustment; Erasing The Scale Adjustment - Wile Cotton Instrucciones De Uso

EN

5.2.2. Adjusting the value downwards

When the measurement result is
displayed, press the F- button three times.
Three bars will appear on the lower edge
of the display. Wait for a moment and the
result appears on the display again. Now
each time you press the F- button, 0,1
moisture % will be deducted from the
result.
Note! This adjustment is specific to the
used scale. In other words there may
be defined specific adjustment for each
scale.

5.2.3. Display the scale adjustment

If the selected scale has been adjusted,
you will see the adjustment displayed after
run- text. Each scale can be adjusted for
+/- 4 moisture percent. The value
displayed may be for example "-.5". This
value means that the scale was adjusted
downwards for 0,5 moisture percent.
When the scale adjustment value is
displayed, you can not change it. You can
adjust the scale only when the
measurement result is displayed. For
more information see also paragraphs 5.2.
Adjusting the result.

5.2.4. Erasing the scale adjustment

17