Setting The Density Value In The Meter; Display The Scale Adjustment; Processing The Result; Automatic Average Calculation - Wile Cotton Instrucciones De Uso

EN
on the display and in a moment the meter
will turn off. Now the meter is ready for
use.
Now the correct scale is set in the meter.
4.6. Setting the density value in the
meter
Switch on the meter with a single press on
the P-button. Wait the number of the
currently selected scale and density value
to appear on the display.
When currently selected density value is
displayed, keep pressing the F-button until
you see 220 on display. The meter will
save the settings for the next
measurements.

4.7. Display the scale adjustment

If you want to make the adjust the scale or
if the scale has already been adjusted,
see paragraphs 5.2. "Adjusting the
result" and 5.2.3. "Display the scale
adjustment".

5. Processing the result

5.1. Automatic average calculation

The meter can calculate the average
value of several measurements. After you
have made a measurement, the result can
be saved for the average calculation.
5.1.1. Saving the measurement result
14