Erasing The Average Calculation Memory - Wile Cotton Instrucciones De Uso

EN
for the average calculation
Make the measurement as usual. When
the result is displayed, press once the F-
button. A will appear on the display and
the meter will add the measurement result
for the average calculation.
The average calculation is ready when
two numbers, for example A05 and 13,8
appear alternating on the display.
The values used in the example mean:
- A05 - the number of measurement
results included into the average value is
5
- 13,8 - the average value of those 5
measurements.
If you do not want to include the
measurement result into the average
calculation, don't do anything after the
measurement, just wait until the meter
automatically turns off it is then ready for
the next measurement.
Before calculating the average value of
every new load of material, make sure
that average calculation memory is
empty and erase it if required.
5.1.2. Erasing the average calculation
memory
Press and hold the F- button. Switch on
the meter with a single press on the P-
15