English - Philips FC8042/1P Manual De Usuario

Super Parquet nozzle
This nozzle enables you to clean and polish your hard floor.
The two microfibre discs help to remove even the finest dust.
The rotating discs also polish your hard floor in one go.
Never use water to clean wooden floors or parquet.
To clean the Super Parquet nozzle:
1 To clean the pads, remove the Super Parquet nozzle from the
appliance and vacuum clean the pads while they are still attached
to the nozzle. Clean the pads at the lowest suction power setting.
2 To clean the pads more thoroughly, remove them from the Super
Parquet nozzle by pulling them off the discs. The pads are fastened
to the discs with Velcro.
You can clean the pads in warm water with a mild detergent.
,
You can even clean the pads in the washing machine.
,
Wash the pads separately. (&*^
Never use bleach or fabric softener to clean the pads.
Make sure the pads are clean and dry before you use them again.
3 Reattach the red sides of the clean pads to the discs.
The light blue sides of the pads need to be in contact with the floor,
not the red sides!
Replace the pads at least every three months.
New pads are available from your local Philips dealer under
type number HR8041.

ENGLISH

5