Direct Evacuation Of Water Condenser - Fagor SFA-8CE Manual De Instalación Y Utilizacion

EN
6 / USER-MAINTENANCE INSTRUCTIONS

• DIRECT EVACUATION OF WATER CONDENSER

To avoid having to empty the collection tank every
time you use the appliance, you have a kit (*) for
removing the water from the condenser directly into
the drain (hose and deflector). To fit this :
— Take off the existing pipe and push it inside the
appliance (Fig. 13).
— Clip the deflector with the top of the pump (Fig. 14).
— Connect the hose from the kit to the end connector
on the appliance (Fig. 15)
You can connect the other end of the hose either :
- To a ventilated trap (Fig. 16 ).
- Or a sink trap (Fig. 17) .
When connecting to a trap, you must remove the fil-
ler plug. Then press home the rubber tip. If neces-
sary, add a clamp connection (Fig. 17 ).
Important :
The deflector must be positioned before the
drain hose connection to avoid any water splashes
when taking off the hose.
Remarks :
(*) This kit is provided with the appliance
or is available near your After-sales service
under the ref. 57X3184 (according to model).
Insert Encart
Hose
Tuyau
Deflector
Déflecteur
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
18