Control Panel And Display; Operation Of The Bottle Cooler; Cleaning And Maintenance; Safety Information - CASO DESIGN WineCase One Manual Del Usuario

13.1 Control panel and display

1 Change between °C and °F, as well as display of the current temperature
2 Increase the temperature
3 Display
4 Reduce the temperature
5 On/ standby button
6 LED

13.2 Operation of the bottle cooler

Connect the adapter plug with the device, then insert the plug into the socket.
Press the On / standby button.
Set your desired temperature.
Place a suitable bottle (less than 91 mm in diameter) in the device. The device starts to cool
down.
LED:
The LED flashes until the set temperature is reached. After that it is constantly illuminated.
As soon as the temperature deviates by more as 3 ° C, the display flashes again.
If you press the ° C / ° F button for a long time, the actual temperature is displayed for a few
seconds.
Please note
► Ambient temperature below 16°C or above 32°C will hinder the performance of the
appliance.

14 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and
maintaining the device. Please observe the notices to prevent damages due to cleaning the
device incorrectly and to ensure trouble-free operation.

14.1 Safety information

Attention
Please observe the following safety notices, before you commence with cleaning the device:
► The device must be cleaned at regular intervals.
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
25