Product Description And Specifications; Intended Use; Product Features - Bosch 0 607 Serie Manual Original

OBJ_BUCH-1663-004.book Page 21 Wednesday, November 23, 2016 10:53 AM
connections or the connection between hose and pneu-
matic tool.
 Never carry the pneumatic tool by the hose.
Symbols
The following symbols could have a meaning for the use of
your pneumatic tool. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the pneumatic tool in a better and safer man-
ner.
Symbol Meaning
 Before installing, operating, re-
pairing, maintaining and replacing
accessories as well as prior to
working near by the pneumatic
tool, please read and observe all in-
structions. Failure to follow the fol-
lowing safety warnings and instruc-
tions may result in serious injury.
 Wear ear protectors. Exposure to
noise can cause hearing loss.
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions per
-1
min
minute
bar bar
psi pounds per square inch
l/s Litres per second
cfm cubic feet/minute
dB Decibel
QC Quick-change chuck
Symbol for hexagon socket

Symbol for external drive
US fine thread
UNF (Unified National Fine
Thread Series)
G Whitworth thread
NPT National pipe thread
Right rotation
Left rotation
Bosch Power Tools
Product Description and Specifica-
tions
fold the fold-out page with the illustration of the pneumatic
tool and leave it open.

Intended Use

The pneumatic tool is intended for driving in and loosening
screws as well as for tightening and loosening nuts within the
given dimension and power range.

Product Features

The numbering of the product features refers to the illustra-
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
1 Tool holder
2 Angled drive head
3 Union nut
4 Lock nut
5 Housing sleeve
Power output
6 Protective sleeve
Unit of energy
7 Auxiliary handle*
(torque)
8 Clamping area (collar)(e. g. for an auxiliary handle)
9 On/Off switch (lever)
Mass, weight
10 Rotational direction switch
Length
11 Hose fitting
12 Connection socket at air intake
Time period, dura-
tion
13 Air outlet with silencer
14 Utility clip
No-load speed
15 Locking screw
16 Supply-air hose
Air pressure
17 Hose clamp
18 Exhaust-air hose, central
Air consumption
19 Exhaust-air hose
20 Motor housing
Unit of relative loud-
21 Extension
ness
22 Shaft in extension
23 Application tool (e. g. an impact socket)
24 Quick-change chuck
Tool holder
25 Locking hook
26 Adjustment disc
27 Adjustment tool
28 Round nut
Connecting thread
29 Clutch
30 Securing ring
31 Clutch spring
Rotational direction
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
English | 21
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, un-
1 609 92A 37H | (23.11.16)