Loading The Silverware Basket; Adding A Dish; Filling The Rinse Aid Dispenser - Forno FDWBI8004-24S Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

PREPARING AND LOADING DISHES

Loading the Silverware Basket

The silverware basket can be divided
into three separate modules that can
be used in both upper and lower racks
1.Spoons
2.Knives
3.Salad forks
4.Forks
5.Large spoons
6. Large forks
1
1
1
1
6
2
2
2
5
3
3
3
3
3
4
4
4
4
4
5
2
2
2
1
1
1
1
1
2
3
4
5
6
WARNING
1.Do not let items protrude though
bottom.
2.Be sure nothing protrudes
though bottom of the basket or
rack to block the lower spray
arm
1
1
1
1
2
2
1
3
3
3
3
3
1
4
4
4
4
4
1
2
2
1
1
1
1
1
In

Adding A Dish

To add or remove items after
wash cycle starts:
1. Open door slightly and wait a few
seconds until wash action stops
before completely opening.
2.Add the item.
3.Close the door firmly to latch within 4 secs,
then cycle will automatically resume.
CAUTION
TO AVOID BURN INJURY: Slightly
open door and wait until spray arms
and wash action stop. Hot water may
splash out of dishwasher. Failure to
do so may result in injury.

Filling the rinse aid dispenser

Rinse aid greatly
reduces water spots and filming. Without
rinse aid, your dishes and dishwasher
interior will collect excessive moisture.
The Heated Dry option will not perform
as efficiently without rinse aid. The rinse aid
dispenser, located next to the detergent
cup, automatically releases a measured
amount of rinse aid during the last rinse.
If the rinse aid is low, the Rinse Aid light
is illuminated at the beginning and end
of the cycle, indicating that it is time to
refill.
10
improves drying and

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido