Troubleshooting - HealthSmart 18-210-000 Manual De Instrucciones

Troubleshooting

Problem
No response/
Automatic reset when
the plastic battery insu-
lator tab is pulled out
The measurement is
not accurate or if there
is any doubt on the
measured result
Check lists
Battery used up?
Battery in wrong
polarity?
Poor battery contact
The measured
temperatures is lower
than 89.6°F (32.0°C) or
higher than 109.3°F
(42.9°C). Check the
method of operation
Indicates a hardware
problem
Operating
temperatures is out
of range
The sensor
temperature has not
been stabilized
Please check if the
infrared sensor is clean
Please check if the
measurement method
is correct and in the
correct mode
13
Action
Change new battery
Take out battery,
reinsert battery
correctly
Follow the instructions
for use.
Contact your
distributor
Use the thermometer
within the range of
operating
temperatures
Wait 10 seconds and
take the measurement
again
Clean the infrared
sensor with a cotton
swab according to the
instructions.
Ensure you have fully
read the user
instructions and know
how to properly use
the thermometer.