Memory Recall; Setting The Date & Time - HealthSmart 18-210-000 Manual De Instrucciones

Memory Recall

There are a total of 9 memory readings.
The current measurement is always stored in the last
position (number 9).
To recall measurements in memory:
1. If the thermometer is OFF, press any button to turn it ON.
2. Press the M (Memory) button. It will show the position of
the most current measurement Fig 1. Followed by the
actual temperature measurement along with the time and
date Fig 2.
NOTE: All subsequent measurements taken will fill the
memory spaces until they reach the number 1 spot. Once all
of the spaces are filled, the oldest measurement will automati-
cally be deleted from memory.
3. Continue to press the MEMORY button to scroll the stored measurements.
4. Press the SET and MEMORY button at the same time to return to the Standby
mode.
Setting the Date and Time
1. Press the SET button to enter the setting mode. In the settings mode, you
can set the following items: Time Format (12hr or 24hr), Time, Date and Sleep
Mode.
2. Press the MEMORY button again to scroll through the
options. Press the SET button to select the desired option.
Note that "PM" will appear on the display in 12hr mode.
NOTE: When the Sleep Mode is activated (display shows Z
the thermometer will turn OFF automatically when not in use,
Fig 3. When the sleep mode is deactivated, the thermometer
will remain ON. To conserve battery life, we recommend
keeping the Sleep Mode turned ON.
10
FIG. 1
FIG. 2
),
Z
FIG. 3