Unpack The Machine; Install The Spray Wand; Install The Uberflex Hose; Operation - GreenWorks GPW1804CK Manual Del Operador

Lavadora a presión
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

12.2

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
If parts of the machine are damaged, do not use the
machine.
If you do not have all the parts, do not operate the
machine.
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
12.3

INSTALL THE SPRAY WAND

1. Push the end of the spray wand (3) into the gun handle
(6).
2. Turn the spray wand (3) clockwise until the tabs lock into
position.
WARNING
Make sure that the connection has no leakage.
12.4

INSTALL THE UBERFLEX HOSE

1. Push and turn clockwise one end of the uberflex hose (7)
into the inlet coupler (13).
2. Install and tighten the other end of the uberflex hose (7)
onto the water outlet coupler (2).
English
13

OPERATION

Make sure that all the connections are tight and have no
leakage before operation.
13.1
CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden hose (not
provided).
When you operate the self-coiling hose, make sure that the
hose has no blockage.
The water supply must come from the water main
Do not use hot water
Do not use water from ponds or lakes
Do the local regulations when you connect the garden hose
to the water supply. Direct connection through a receiver
tank or backflow preventer is usually permitted.
Inspect the filter in the water inlet connector before you
connect the garden hose
If the filter is damaged, do not use the machine until the
filter is replaced.
If the filter is dirty, clean the filter.
1. Uncoil the garden hose (15).
2. Let the water flow through the garden hose (15) for 30
seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden hose (15) to the
water inlet connector.
There must be a minimum of 3 m of free hose between the
water inlet and the water supply.
7
WARNING
WARNING
WARNING
WARNING
CAUTION
CAUTION
EN
Tabla de contenido
loading

Tabla de contenido