Hunter 90121 Manual Del Usuario página 9

MAINTENANCE
This fan is permanently lubricated
and will not require ad di tion al lu bri -
ca tion (oil) for the life of the fan.
This fan re quires little maintenance
and contains no user ser vice able
parts. DO NOT try to fi x it yourself.
Contact qual i fi ed service personnel if
servicing is needed.
TO CLEAN:
1. Before cleaning, turn fan off
and unplug from electrical out-
let. Wipe off excess dust with a
lintfree cloth.
2. To ensure adequate air cir cu -
la tion to the motor, keep vents
lo cat ed at the rear of the mo-
tor hous ing free from dust ac-
cu mu la tion. A vacuum cleaner
hose can be used to clean these
vents.
3. DO NOT immerse the fan in wa-
ter or any other liquid.
CLEANING GRILL AND BLADE:
1. Turn the fan off and unplug
from the electrical outlet.
2. To disassemble the grill, loosen
the ring screw at the bottom of
the grilles and remove the ring.
Remove the front grille by re-
moving the interlock switch.
41746-01 05/02/2005
41746_CentFan_04.29.05.indd 9
3. To disassemble the blade assem-
bly, loosen the setscrew behind
the fan blades and pull the
blades off of the motor shaft.
4. Grills and blades may be cleaned
with mild soap and wa ter.
5. Use a soft, slightly damp cloth
to wipe the remaining fan parts.
6. DO NOT allow water or any
oth er liquid to get into the mo-
tor housing or base.
7. Reassemble the fan after blades
and grills have dried com plete ly.
First, replace the blades. When
replacing the blade screw, you
should feel some resistance
as the screw engages the bar.
Next, align the grills, replace
the interlock switch, replace the
ring, place the hook in the hole
and replace the screw.
8. DO NOT plug fan into an elec-
tri cal outlet until it has been
fully reassembled.
9
5/2/05, 10:51:06 AM