Uniteck UNIBAT Manual Del Usuario página 20

EN
WIRING
Wiring connection serie / parallel
For the coupling, proceed as below:
Parallel
Series
NB: Cables resistors in every chain need to be the same (same section, same length).
Some advice:
For the parallel wiring, use the diagonal wiring for standardization of charging/discharging, with a
maximum of 4 parallel chains.
Do not couple batteries of different ages and different technologies.
If there is the same capacity, prefer one powerfull battery than 2 small batteries connected in parallel.
Spread a thin layer of contact lubricant on terminals and on roll thread. Avoid all contact with the battery
box.
www.uniteck.fr
20/46