Control Panel And Features - Sears Kenmore 6012 Manual De Uso Y Cuidado

1
1
DRYER CYCLE KNOB
1
Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
Timed Dry
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
Auto Dry
Auto Dry cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size, and
dryness setting.
Air Only
Use the Air Only setting to dry foam, rubber, plastic,
or heat-sensitive fabrics.
Wrinkle Guard™ function (on some models)
When you are unable to remove a load of clothes
from the dryer as soon as it stops, wrinkles can form.
The Wrinkle Guard™ function periodically tumbles,
rearranges, and fluffs the load without heat to help
keep wrinkles from forming, for up to 40 minutes
at the end of a cycle.

CONTROL PANEL AND FEATURES

Not all features and options are available on all models.
Appearance may vary.
Dry Temp (on some models)
2
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the higher
setting. See "Cycle Guide."
Cycle Signal/Push to Start
3
The Cycle Signal produces an audible sound when the drying
cycle is finished. On some models, this knob is combined with
the Push to Start button. Promptly removing clothes at the
end of the cycle reduces wrinkling.
Turn the CYCLE SIGNAL knob to select the desired setting
(On or Off). With combined buttons, press and hold the
CYCLE SIGNAL/PUSH TO START button to start the dryer.
On models without the cycle signal, press the PUSH TO
START button to start the dryer.
NOTE: During the Wrinkle Guard™ function and when
the Cycle Signal is on, the tone will sound every 5 minutes
until the clothes are removed or the Wrinkle Guard™
function ends.
2 3
3
5