GasGas enducross EC'08 Manual Del Usuario página 141

MALFUNCTION
17 Handlebar vibration
18 Motorcycle pull to one side
19 Brakes do not operate correctly
20 Blown light bulbs
21 Lighting system does not
operate
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
- Excessive steering axles tolerances.
- Loose handlebar bracket, and loose
handlebar stem locknut.
- Bent chassis.
- Incorrect steering adjustment.
- Bent steering stem.
- Bent front fork.
- Incorrect wheel alignment.
- Worn discs.
- Leaking brake fluid.
- Deteriorated brake fluid.
- Broken pump piston.
- Incorrect brake adjustment.
- Voltage regulator faulty.
- Blown lighting relay fuse.
67
-
- Tighten steering bracket and steering stem locknut to the
correct torque values.
- Tighten steering bracket and steering stem locknut to the
correct torque values.
- Replace the chassis. Go to a specialized workshop.
- Adjust the steering. Go to a specialized workshop.
- Replace the steering stem. Go to a specialized workshop.
- Replace the front fork.
- Align the wheels.
- Replace the discs.
- Verify the brake circuits. Replace the damaged or broken
parts.
- Drain the brake fluid and fill with the new fluid recommended
by the manufacturer.
- Replace the pump piston.
- Adjust brakes.
- Remove the seat and the fuel tank, and check all
connections, check the voltage regulator and the fuses in
the fuse box .
- Remove the seat, the fuse box cover, and replace the
fuse.
-
REMEDY