Beem Basic Selection Manual De Instrucciones página 42

Ocultar thumbs Ver también para Basic Selection:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN
Descaling
Limescale deposits have an adverse effect not only on the quality of the coffee and
the water, but they also cause power losses and shorten the lifespan of the device.
The thicker a limescale layer is, the more diffi cult it is to remove.
We therefore recommend
accordance with the water quality in your area and how often the device is used (approx. every
2 – 6 weeks).
The fi rst indications that descaling is required are a large amount of steam being produced and
slower brewing of the coffee.
For descaling we recommend the BEEM premium descaler concentrate. The effi cient, food-safe and
environmentally friendly BEEM premium descaler concentrate is avail able from selected specialist
stockists, via our website www.beem.de or from our customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water tank (13) up to the 10-cup mark with a concentrate/water solution of no
more than 1:20 (one part concentrate to 20 parts water).
2. Use the button
3. Press the button
4. Let the descaling solution take effect for a little while.
5. Use the button
6. Press the button
through.
7. To rinse the device, allow two tankfuls (10 cups) of clear water to run through it. The device
is now descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a prolonged
period. Clean the device again if necessary (see the "Cleaning and Care" chapter) and let it dry
completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from direct
sunlight and cannot be accessed by children or animals.
02049_DE-EN-FR-ES-IT_A5_V4.indb 36
02049_DE-EN-FR-ES-IT_A5_V4.indb 36
regularly removing limescale deposits with a descaling agent in
(25) to set the number of cups to 2.
(20) to switch on the device. Allow the two cups to run through.
to set the number of cups to 8.
to switch on the device and allow the rest of the solution to run
36
24.09.2018 15:51:10
24.09.2018 15:51:10
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

02049

Tabla de contenido