General Safety - Eco-Flo EFLS10 Manual Del Usuario

STOP Before you start
Fill Pump with water to prime: Ensure pump body is filled with
water to discharge.
Motor's Electrical Settings: Set motor to proper voltage,
Help Line: Call 1-877-326-3561 for assistance
Important Safety Instructions Safety Labels
Carefully read and follow all safety
instructions in this manual and on pump.
SAVE THESE INSTRUCTIONS – This manual
contains important instructions that should be
followed during installation, operation, and main-
tenance of the product. Save this manual for
future reference.
This is the safety alert symbol. When you
see this symbol on your pump or in this manual,
look for one of the following signal words and be
alert to the potential for personal injury!
not avoided, will result in death or serious injury.
if not avoided, could result in death or serious
injury.
not avoided, could result in minor or moderate
injury.
NOTICE
indicates practices not related to
personal injury.
Keep safety labels in good condition. Replace
missing or damaged safety labels.
For parts or assistance, call ECO-FLO Customer Service at 1-877 326-3561

GENERAL SAFETY

indicates a hazard which, if
indicates a hazard which,
indicates a hazard which, if
GENERAL SAFETY
touch an operating motor. Motors are de-
signed to operate at high temperatures. To
avoid burns when servicing pump, allow it to
cool for 20 minutes after shut-down before
handling.
Do not allow pump or any system component
to freeze. To do so will void warranty.
Pump water only with this pump.
Periodically inspect pump and system com-
ponents.
Wear safety glasses at all times when working
on pumps.
body may explode if used as a booster pump.
ELECTRICAL SAFETY
Safely discharge capacitor before handling or
maintaining pump. Consult a qualified
electrican.
NOTICE: Allowing any part of system to
freeze voids warranty.
2
Risk of burns. Do not
Risk of explosion. Pump
Risk of electrical shock.