Hoover PROFESSIONAL Serie Manual Del Usuario página 18

Maintenance
How to Remove and Clean Brushroll
HOW TO REPLACE
1
Slip brushroll through belt.
2
With belt in place, pull and slide
brushroll into unit, making sure that
the brushroll end caps are in correct
orientation.
3
Replace belt cover and secure by
replacing all 6 screws.
18
*in front of wheel
BRUSHROLL PART #: 440012796 – TO BUY, VISIT HOOVER.COM
CAUTION
!
To reduce the risk of injury from moving parts, unplug before servicing.
IMPORTANT
!
Rotate brushrolls manually to make sure belt is not twisted or pinched.
STORAGE
Before storing: Empty Clean Water Tank and let air dry. Replace on cleaner.
Empty Dirty Water Tank, rinse tank and lid thoroughly with clean water and let
air dry.
Allow brushes and underside of carpet cleaner to air dry thouroughly before
storing carpet cleaner on a carpeted or wood surface.
LUBRICATION
The motor is equipped with bearings that contain sufficient lubrication for the
life of the motor.
The addition of lubricant could cause damage. Therefore, do not add lubricant
to motor bearings.
!
!
TOO MUCH INFO
FOR 1 PAGE.