PocketWizard PLUS III Guia De Inicio Rapido página 11

Channels and Zones
NOTE: Some PocketWizard
Channels as well as ControlTL
flash power control. This Plus III can work with any PocketWizard radio transmitting or
receiving on Standard Channels, but not ControlTL Channels.
Channels
The Plus III Transceiver supports 32 different Standard Channels. Each Stan-
®
dard Channel represents a digital code transmitted on specific PocketWizard
radio frequencies. This enables many photographers to work in the same
area or for one photographer to exclusively control different sets of receivers.
A Plus III will trigger any number of receiving PocketWizard radios set to the
same channel. Radios set to different channels will not trigger each other.
Press the Channel Up/Channel Down Buttons
Features that use Zones are only available on channels 17-32.
Using Zones
Zones can be used to toggle remote cameras or flashes on or off from a
transmitting PocketWizard radio. Zones can also be used when sharing
flashes with another photographer so only some of the remote flashes are
shared, even when using the same channel.
Zones A, B, C, and D are selectable via the Plus III's Zone Toggle Buttons
when using channels 17-32. The enabled Zones are displayed in a box on
the right side of the LCD. You can enable any combination of all four Zones.
A receiving Plus III will only trigger if the transmitting PocketWizard radio
has at least one matching zone enabled.
Quad-Zone Triggering on a transmitting or receiving Plus III can work with any
other PocketWizard radios that support Quad-Zone Triggering Channels 17-32.
radios, like the MiniTT1
®
Channels. ControlTL Channels work with TTL or remote
®
or FlexTT5 , operate on Standard
® ®
to change channels.
11
11