PocketWizard PLUS III Guia De Inicio Rapido página 10

Triggering Modes
LR (Long Range) Mode doubles the maximum range
of a radio in a given shooting environment. Long Range
Mode must be enabled on both transmitting and
receiving radios. Use this mode when triggering
remote cameras at greater distances. It can also be
used with remote flash, but there may be a reduction in
maximum X-sync speed.
RP (Repeater) Mode automatically retransmits any
triggers received on the selected channel, increasing the
maximum triggering distance when a Plus III is placed
®
half-way between a pair of transmitting and receiving
radios. This mode is recommended when triggering
remote cameras. It can be used with flash with a reduction
in maximum X-sync speed. This is not the same operation
as Auto-Relay Mode.
Notes: You may use multiple radios in repeater mode for extremely
long distances. Make sure each repeating radio can only receive
the signal from one other radio, otherwise an endless trigger loop
could occur! Put the transmitting radio into Tx ONLY Mode for best
performance when using Repeater Mode.
Repeater mode is only for Standard Channels. It will not repeat
ControlTL Channel information such as TTL or power control.
For more detailed information about triggering modes,
wiki.PocketWizard.com
visit