Giving Titles To Md (Title Function) - JVC XM-R700SL Manual De Instrucciones

Giving Titles to MD (TITLE Function)

Use the unit to carry out this function.
• You can give a disc title to the MD and a track title to the tracks in the MD. Any title name can be given up to 61
characters using the provided character sets.
About the number of characters inputted for an MD
The total number of characters that can be input for an MD is 1792, and the maximum number that can be input for
each track is 61. (However, the actual number you can input may be slightly less than this maximum numbers due to
the MD limitations — see page 18.)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4: see page 9) method is used for recording, the maximum
number you can input for a track title automatically reduced since "LP:" and four spaces are automatically added
to the beginning of the track title. Consequently this reduces the total number of characters you can input for an
MD.
Example: You can input up to 10 characters for each track if an MD is composed of 120 tracks recorded using the
stereo long-hour recording method.
Note
• When "LP:" is recorded to head of the title, you cannot delete (edit) it. Attaching it or not is selectable before
recording. For details, see "Title "LP:" ON/OFF" on page 10.
1 In Stop mode, press the EDIT/ENTER
button.
"TITLE?" is displayed.
2 Press the SET button.
• You can listen to the track by pressing the 6 but-
ton. The track to be entitled is repeatedly played.
Turn the JOG dial (or press the 4 or
3
¢ button) to select the track number
to be entitled.
To select the disc title, turn the JOG dial reverse
(or press the 4 button) until the following disc
mark is shown on the display.
[Title editing buttons on the unit]
Button
Changes the type of characters to be input as follows.
Upper-case letters (ABC) = Lower-case letters (abc) = Symbols (space, !") = Numbers (012) =
(back to the beginning)
Adds the character being selected to the title name area.
JOG
Moves the cursor for the character to be input to the right. When continue turning, the characters scroll to
(forward)
the left.
JOG
Moves the cursor for the character to be input to the left. When continue turning, the characters scroll to
(reverse)
the right.
¢
Moves the cursor for the title name to the right.
4
Moves the cursor for the title name to the left.
4
5
Track to be entitled
Disc mark
Function
Press the SET button.
Title name area
Cursor
Characters to be input
Input a preferred title (up to 61 charac-
ters).
Use the following title editing buttons to input a title.
14