Se Ng Up The Portafi Lter Support And Spout - Mahlkonig E80 SUPREME Instrucciones De Uso

Se ng up the portafi lter support and spout
You will need a fl at-head screwdriver to adjust the portafi lter
support (not included in the scope of delivery).
Adjust the portafi lter support (10) to the size of your espresso machine's
portafi lter (see Fig. C):
1. Make sure that the grinder is switched off (On/Off switch (5) to posi on
"0").
2. Turn an clockwise using a fl at-head screwdriver to loosen the screws (8)
for adjus ng the portafi lter support (le and right).
The portafi lter support is lowered as far as it will go.
3. Insert the portafi lter into the portafi lter support (12).
4. Push the portafi lter support upwards un l the portafi lter fi ts exactly
between the portafi lter support and the portafi lter intake.
If the portafi lter support does not fi t, contact your supplier (see
chapter "Maintenance and service").
5. Hold the portafi lter support in posi on and fi x it by turning the screws
for adjus ng the portafi lter support (le and right) clockwise un l ght
using a fl at-head screwdriver.
6. Push the spout guide (19) up or down in the lock to align the spout (13)
in the op mal posi on for your portafi lter (see Fig. E).
Align the spout so that the ground coff ee falls from the spout into the
centre of the portafi lter.
E80 SUPREME | EN
51