PNI House WiFi550 Manual De Usuario página 8

EN
SYSTEM CONTROL VIA MOBILE APPLICATION "DANALE"
1. Download the "Danale" app by accessing the AppStore or Google Play or scanning the codes below:
2. Create an account in the application or log in directly if you already have one.
3. Ensure that the NVR is connected to the Internet and that the NVR's IP address is correct.
4. Connect the NVR to the router via cable.
5. In the NVR menu in the Wire Network section, check the DHCP option to get the IP address automatically
or add the manual network parameters.
6. Enable the P2P option. In the main interface of the NVR, go to Menu - Network - Mobile. Check Enable
and click Refresh until status becomes Online. If after 5 minutes the status remains "Not online" then it
is a problem with setting network parameters. Ensure that the NVR is connected to the Internet.
7. Add the device to your app.
• Push the button "+"
a. Add NVR through Network Search. Choose the WiFi network you want to connect to. Enter your network
password. The application will look for the connected systems in the network.
Nota: Your mobile phone and NVR must be connected to the same router.
8