Internet Connection - PNI House WiFi550 Manual De Usuario

EN
6. Motion detection. In the main interface, right click - Menu - Alarm - Motion Detect. Choose the channel,
click Enable, set Sensitivity, Detection area, Time, and Alarm / Beep, then click Apply. Go back to the
Record - Record Time - Custom interface. Select the channel and the time period when you want to
activate the motion detection recording, then tap Motion and click Apply.

INTERNET CONNECTION

In the main interface, right click - Wire Network. Or, in the main interface, right - click Menu - Network - Wire.
The NVR can connect in two ways to the internet: manually and automatically.
Manual Connection: Enter the IP address, Subnet, Gateway and DNS.
Automatic connection: Check DHCP. The system automatically retrieves the connection data from the
network. If you are not familiar with setting up a network, we recommend the DHCP option.
BRIDGE FUNCTION (REPEATER)
With this feature, the NVR offers a longer wireless signal transmission distance. Thus, IP cameras located in
remote areas can connect to another IP camera and thus connect to the NVR.
1. In the main interface, right click - Menu - Channel - Bridge.
6