Introduction; Safety - Skymsen CR-4L Manual De Instrucciones

1. Introduction

1.1 Safety

When incorrectly used, this equipment is a potentially DANGEROUS machine. Cleaning,
maintenance and any other service on the machine must be made by properly trained
personnel, and the machine must be always disconnected from the electric network.
The instructions below must always be followed in order to avoid accidents:
1.1.1 Read this instructions
1.1.2 To prevent from the risk of an electric shock and damage to the equipment, never
use it with wet clothing and feet on a wet or humid surface.
Never dip it in water or any other liquid. Do not spray water directly upon the equipment.
1.1.3 The use of any equipment must be always supervised, especially when it is used
near children.
1.1.4 Disconnect the machine from the socket when: It is not in use, It is necessary to
insert or remove any parts, It is necessary to insert or remove accessories, when cleaning,
repairing or servicing the equipment.
1.1.5 Never use any equipment with damaged cords or/and plugs. Do not place the
electric cord on table/counter edges or upon hot surfaces.
1.1.6 If your equipment is not working properly, or when it suffers any impact during a
drop or has been damaged somehow, contact Technical Assistance for maintenance.
1.1.7 The use of accessories not recommended by the manufacturer may cause physical
injuries.
1.1.8 When the equipment is turned on, keep hands and any tools away from its moving
parts. This will prevent from physical injuries and damages to the machine.
1.1.9 During operation, never use clothes with wide sleeves specially at the wrist . .
1.1.10 When making the electric connection of the equipment, be sure the equipment
voltage is the same as the network electric voltage.. Provide a correct grounding in
accordance to your local safety standards.
3