Husqvarna 525HE3 Manual Del Usuario página 23

causes the failure of a warranted part for a
period of two years.
WHAT IS COVERED
REPAIR OR REPLACEMENT OF PARTS:
Repair or replacement of any defective
warranted part will be performed at no charge
to you at a brand authorized servicing dealer.
Except for repairs and replacement under this
Emission Control Warranty, you may choose a
repair shop or other person to maintain,
replace or repair emission control devices and
systems. However, Husqvarna Professional
Products, Inc. recommends that all
maintenance, replacement and repairs of
emission control devices and systems be
performed by a brand authorized servicing
dealer.
IMPORTANT:This product is compliant with
U.S. EPA Phase 3 regulations for exhaust and
evaporative emissions. To ensure EPA Phase
3, California Air Resources Board and
Environment and Climate Change Canada
regulation, we recommend using only genuine
product branded replacement parts. Use of
non-compliant replacement parts is a violation
of federal and state laws.
WARRANTY PERIOD: Any warranted part
which is not scheduled for replacement as
required maintenance, or which is scheduled
only for regular inspection to the effect of
"repair or replace as necessary" is warranted
for 2 years (or time defined in the product
warranty statement, whichever is longer) from
the date of purchase by the initial consumer
purchaser. Any warranted part which is
scheduled for replacement as required
maintenance is warranted for the period of the
time up to the first scheduled replacement for
that part. Any part repaired or replaced under
the warranty must be warranted for the
remaining warranty period.
DIAGNOSIS: You will not be charged for
diagnostic labor that leads to the
determination that a warranted part is in fact
defective, provided that such diagnostic work
is performed at a brand authorized servicing
dealer.
1173 - 001 -
OTHER DAMAGES: Husqvarna Professional
Products, Inc. will repair other engine
components caused by the failure of a
warranted part still under warranty.
EMISSION WARRANTY PARTS LIST
1. Carburetor and intake parts or fuel injection
system.
2. Air filter and fuel filter covered up to
maintenance schedule.
3. Spark Plug, covered up to maintenance
schedule.
4. Ignition Module.
5. Mufflers with catalyst and exhaust
manifolds.
6. Fuel tank, fuel lines (for liquid fuel and fuel
vapors), fuel cap, carbon canister and tip-
over/anti-slosh valves as applicable.**
7. Electronic Controls, Vacuum, temperature,
and time sensitive valves and switches.
8. Hoses, connectors, and assemblies.
9. All other components the failure of which
would increase the engine's exhaust and
evaporative emissions of any regulated
pollutant as set forth at the following:
• For California see California Code of
Regulations, 13 CCR §2405(d) and
2760(d).
• For U.S. and Canada see US Federal
Code of Regulations, 40 C.F.R 1068
Appendix I (iii).
WHAT IS NOT COVERED
All failures caused by abuse, neglect,
unapproved modifications, misuse or improper
maintenance are not covered.
ADD -ON OR MODIFIED PARTS: Add-on or
modified parts that are not exempted by
CARB or EPA may not be used. The use of
any non-exempted add-on or modified parts
will be grounds for disallowing a warranty
claim. Husqvarna Professional Products, Inc.
will not be liable to warrant failures of
warranted parts caused by the use of a non-
exempted add-on or modified part.
HOW TO FILE A CLAIM
If you have any questions regarding your
warranty rights and responsibilities, you
23