Recalling stored data and clearing memory
To recall the last recorded message press „M". The date
and time of this measurement will be displayed and af-
ter about 3 seconds the actual measurement value co-
mes up automatically (Systole, Diastole, Puls).
Repeated pressing of „M" will now successively display
all measurements contained in the memory as descri-
bed above.
To start a new measurement, simply press „START".
IMPORTANT: The memory will be cleared within 30
seconds if the unit is in the Time display mode while the
batteries are being exchanged.
If the batteries are removed whilst the measuring values
are displayed, the memory store is cleared instantly.
30
Clearing the memory store
Press „M" and hold for 5 seconds until the symbol
to flash. The memory store is now cleared.
Systole
mmHg
Diastole
mmHg
Puls/min.
starts