Description Of Symbols; General Power Tool Safety Warnings - Silverline 102580 Manual Del Usuario

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Double insulated for additional protection
Risk of electrocution
According to the applicable regulations, the appliance must
never be used on the drinking water supply without a system
separator
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
V Volts
~
Alternating current
A Ampere
n
No load speed
o
Hz Hertz
W, kW
Watt, kilowatt
/min or min (revolutions or reciprocation) per minute
-1
4
102580_Z1MANPRO1.indd 4
Original Instructions
Specification
Voltage: ...................................................230V~50Hz
Power: ....................................................1650W
Working Pressure (Bar): ..........................70
Max Pressure (Bar): ................................105
Working flow rate: ..................................5.7L/min
Maximum flow rate: ................................7.1L/min
High Pressure Hose Length: ....................5m
Lance Nozzle Adjustment: .......................0-60°
Detergent Ratio: ......................................5.4% (1/19th)
Inlet Water temperature range: ...............5-50°C
Inlet Water Pressure: ...............................0.1-4 Bar
Protection class: .....................................
Ingress protection: ..................................IPX5
Power cable Length: ...............................5m
Weight: ...................................................5.5kg
Sound and vibration information:
According to Machinery Directive 2006/42/EC:
Sound pressure (L ): ..............................80.7dB(A)
PA
Sound power (L ):..................................93.2dB(A)
WA
Uncertainty K: .........................................2.6dB
Weighted vibration (a ): ...........................< 2.5 m/s²
h
According to Outdoor Noise Directive 2000/14/EC:
Guaranteed sound power (L ): ...............96dB(A)
WA
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents
b) Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control
Approx.
(1.45-60psi/
0.01-0.4Mpa)
23/05/2014 14:58