Idiomas disponibles
Idiomas disponibles
knob
Button with
indicator light
Button with
indicator light: press this briefly to
switch the machine on or off. The green indicator light
indicates that the machine is switched on. To switch off the
washing machine during the wash cycle, press and hold the
button for approximately 3 seconds; if the button is
pressed briefly or accidentally the machine will not switch
off. If the machine is switched off during a wash cycle, this
wash cycle will be cancelled.
direction. To select the most suitable wash cycle, please refer
to the “Table of wash cycles”.
The knob will not move during the wash cycle.
buttons: press and hold one of the buttons to
store a cycle with your own set preferences in the memory of
the machine. To recall a previously-stored cycle, press the
corresponding button.
button: press to modify or exclude the
temperature setting; the value selected will appear on the
display above (see “Running a wash cycle”).
button: press to modify or exclude the spin
cycle; the value selected will appear on the display above (see
“Running a wash cycle”).
button: press to set a delayed start
for the selected wash cycle; the set delay time will appear on
the display above (see “Running a wash cycle”).
buttons: press to select the available options. The
indicator light corresponding to the selected option will remain
lit (see “Running a wash cycle”).
icons: these illuminate to indicate the
progress of the wash cycle (Wash
Drain
). The text
lights up when the cycle is complete.
button with indicator light: when the green
indicator light flashes slowly, press the button to start a wash
cycle. Once the cycle has begun the indicator light will remain
lit in a fixed manner. To pause the wash cycle, press the button
again; the indicator light will flash in an orange colour. If the
knob: may be turned in either
– Rinse
– Spin
button
button
buttons
button
“Door locked”
indicator light is switched off, the door may
be opened. To start the wash cycle from the point at which it
was interrupted, press the button again.
porthole door is locked. To open the door, pause the wash
cycle (see “Running a wash cycle”).
activate or deactivate the control panel lock, press and hold
the button for approximately 2 seconds. when the indicator
light is illuminated, the control panel is locked. This means it is
possible to prevent wash cycles from being modified
accidentally, especially where there are children in the home.
indicator light: the
the washing parameters, an energy saving of at least 10% is
made. Furthermore, before the machine enters “Standby”
mode, the icon will light up for a few seconds; when the
machine is switched off the estimated energy saving will be
around the 80% mark.
The first time the machine is switched on, the first
language will flash on the display. The " ", "OK" and "V"
symbols will appear on the display, in line with the 3 buttons
on the right-hand side. The languages change automatically
every 3"; alternatively, they can be changed by pressing the
buttons next to the " " and "V" symbols. Use the "OK" button
to confirm the language, which will be set after 2". If no
buttons are pressed, the automatic language change will
begin again after 30".
The language may only be changed while the machine is
switched off.
Press and hold the temperature
–
buttons for 5''; a short beep sounds and the set language
flashes on the display. Press the buttons next to the " " and
"V" symbols to change the language. Use the button next to
the "OK" symbol to confirm the language, which will be set
after 2". If no buttons are pressed, the language set previously
will be displayed after 30".
Switch on the machine.
button
with indicator light
indicator light
icons
button with
indicator light
indicator light
indicator light: indicates that the
button with indicator light: to
icon lights up when, after altering
+spin
+delayed start
