Taking The Wallbox Emh3 Out Of Operation - ABL Wallbox eMH3 Instrucciones De Uso

28
| Wallbox eMH3 – Taking the Wallbox eMH3 out of operation
2
Locate the RCCB (TWIN wallboxes: both
RCCBs) and press the button engraved T or
marked Test.
y The RCCB must now trip and flick its pivot
lever into the centre position.
3
Now flip the pivot lever first to the 0 position
and then back to the I position.
4
Flip the housing cover up so that it clicks into
the housing and lock it with the triangular key.
Danger
Dangerous electrical currents
Should the RCCB malfunction during testing, you must not continue to operate the wallbox under any
circumstances!
ƒ Contact a qualified specialist electrical contractor to have the error resolved.

Taking the Wallbox eMH3 out of operation

In case of severe malfunctions or damage to the device, you must take the Wallbox eMH3 out of opera-
tion. To do so, proceed as follows:
1
Open the housing cover of the wallbox using
the triangular key and lower it.
T
T
T
2