Tabla de contenido
Idiomas disponibles
Idiomas disponibles
21. Never heat objects such as
cans or bottles in the electric
kettle.
22. Make sure that the lid of the
appliance is always com-
pletely closed, to prevent
injuries from hot splashing
water.
23. Do not open the lid as long
as the water is boiling, to
prevent injuries from hot
splashing water.
24. Never fill the appliance with
more than 1.8 liters of water,
to prevent the water from
boiling over.
25. Never switch on the appli-
ance if there is no water in
the kettle.
26. Make sure that all users,
especially
aware of the danger of injury
from emerging steam or hot
splashing water – danger of
burns!
27. Do not move the appliance
as long as it is in operation,
to prevent burns from splas-
hing water.
28. The electric kettle features
boil dry protection, which
means the appliance shuts
off automatically if the hea-
ting element becomes too
hot. Allow the appliance to
CAUTION:
Do not open the lid while the water is boiling. If the kettle jug
is filled beyond its maximum capacity, boiling water can splash
out. The appliance becomes very hot during operation and
maintains the heat during some time after disconnection.
Never open the housing of the appliance. This can result in electric
shock.
children,
are
Copyright UNOLD AG | www.unold.de
cool about 15 minutes. Then
fill the electric kettle with
cold water. The boil dry pro-
tection is deactivated and
the appliance is ready for
operation again.
29. Do not use the appliance
with accessories of other
manufacturers or brands, to
prevent damage.
30. Unplug the appliance from
the power supply after use
and prior to cleaning. Never
leave the appliance unatten-
ded when it is plugged in to
the power supply.
31. Check the appliance, the
plug and the power cord
regularly for wear or damage.
In case of damage to the
power cord or other parts,
please send the appliance or
the base for inspection and
repair to our after sales ser-
vice.
32. Unauthorized
result in serious risks to the
user and void the warranty.
33. If the supply cord is dama-
ged, it must be replaced
by the manufacturer or its
service agent or a similarly
qualified person in order to
avoid a hazard.
repairs
can
15
Tabla de contenido
