Tabla de contenido
information text
EN
ENglish
In connection with these low powers,
which are very different from bulb ver-
sions, there can be problems with the
bulb failure check during operation on
various traction vehicles. Since indicator
failure checks are required by legislation,
we recommend only operating the light
in combination with an indicator control
unit part no. "5DS 009 602-..., 5DS 009
552-... or LED flasher unit 4.. 009 492".
In addition, further lighting functions are
detected by some traction vehicles. This is
a vehicle comfort function which is not re-
quired by legislation and does not release
caRE iNstRuctiONs
Outer lens
•
Rinse under running water.
•
Use a little detergent if necessary (not a scouring agent!).
•
Clean with a soft cloth or sponge and then dry.
•
Do not use a microfibre cloth or scouring pad!
Reflector
•
Do not touch the silver-coloured area with your fingers (hold the reflector at the side)!
•
Do not do any cleaning inside the bulb sockets!
Hella recommendation:
Use a natural sponge!
drivers from their obligation to see for
themselves that the lighting equipment is
working. Here, too, faulty diagnoses can
be a result of the lower power levels in-
volved (instrument panel in the driver cab
indicates a bulb failure although the func-
tion is working).
The functional ability of these light fail-
ure checks can only be established by the
vehicle manufacturer. If the control unit
in the vehicle can restrict the current to
match the above requirement, additional
fuse protection is not required for the
lamp. Operation of the light with alternat-
ing current or pulsed direct current is not
permitted! The functional ability of these
light failure checks can only be estab-
lished by the vehicle manufacturer. The
individual light functions may only be op-
erated with a vehicle fuse of max. 3A.
28
Tabla de contenido
